HVAC
<<  Page 230 of 704  >>
CONDENSERS
CONDENSER COIL TYPE
SERPENTINE TYPE: Continuous extruded aluminum tube, 3/4 to 2 inches thick.
The fin is either skyve type or vacuum brazed ribbon type spaced approximate-
ly 14 fins per inch. High heat rejection, compact size exact O.E.M. replacements.
TUBE AND FIN TYPE: Constructed with .008 thick aluminum corrugated fin 3/4 to 2 1/2 inches in thick-
ness.
Fin spacing at 10 to 12 fins per inch providing maximum heat rejection.
Tubes are either copper or aluminum.
GRILLDENSER TYPE: Constructed with .030 to .050 aluminum, fins are 3/4 of an inch thick.
Fins are spaced at 2 to 4 fins per inch providing minimal air flow restriction.
Tubes are either .035” wall aluminum or .022” wall copper.
MULTI FLOW:
Constructed with .0051 thick zinc coated cross flow tubes.
Fin spacing is 14 fins per inch. Four pass design.
A
Overall Width
T
B
Thickness
Fin Width
Fitting
Fitting
Location
Location
G
D
Fitting
Fitting
Location
Location C
H Height
E
Fitting
Fitting
Location
Location
J
F
TYPICAL HEADER TYPES
1
2
3
4